Heath-consultants Aqua-Scop Instrukcja Użytkownika Pobierz pdf (Strona 9)

A. Amplier Module (Part No. 2916426)

(Figure 3)

1. General Specications:

Weight: 1.37 lbs. (620 grams) including batteries.

Size: 5” deep x 3.7” wide x .4” thick (12.7 x 9.40

x 6.096 cm) including all projecting knobs,

clips, and jacks.

Batteries: Requires 2 alkaline 9-volt batteries. Eveready

522, Mallory MN1604 or any NEDA 1604A

type is recommended.

Battery Life: Approximately 30 hours.

Amplier

Gain: Approximately 3 x 10

volts/volt maximum.

Storage

Temperature: Limited to the specications on the batteries

used.

Figure 3 depicts in two views the Amplier Module with all hardware,

in put/output jacks, and controls. Battery access is gained by removing

the Battery Access Plate, exposing the two nine volt batteries, which

power the instrument. The battery adjacent to the input jack should

be removed rst. The second battery may require lateral movement

toward the input jack end to clear the opening. Replacement and inser-

tion should be performed in the opposite sequence. Be careful not to

cross thread the access plate retaining screw when securing the battery

access plate.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 38 39

Brak uwag

Heath-consultants Aqua-Scop Instrukcja Użytkownika Strona 9